Pricing
Policy For Wide Format Printing:
Big
Foot printing considers every job to be custom, on the customer’s
behalf. Although the
table below will give an estimate of “per square foot” costs for
the different common materials we print on, other factors must also
be considered.
Set
Up Charge:
When
printing from a customer-supplied graphic there is a setup charge
that ranges from $50-100 depending on the size and scope of the
project.
Design
Charge:
For
projects that require us to design your project, there is a standard
$50 per hour rate with a $100 minimum. However, setup will be part of the design process and there
will not be a setup charge in addition to the design fee.
Quotes:
A
quote will be provided before work begins on all projects.
This will include an estimate of design time or setup
required and a specific price per square foot for you project.
The per square foot price will fluctuate slightly depending
on the amount of coverage and complexity of the design and cutting
if required.
Supported
File Formats For Customer Supplied Artwork:
Customer
supplied artwork can be mailed on CD ROM or e-mailed to us (subject
to size file limits) in EPS format with all text converted to curves
or in bitmap (TIFF or JPG) with at least 150 dpi per finished inch.
In other words, for a print from a bitmap that is 18” x
24” inches the bitmap would be 3600 x 2700 pixels in size.
It
is strongly suggested that if you have any questions regarding file
setup and submission, you should contact Big Foot printing and speak
with a technical support representative.
[
Click here to fill out a “Request For
Quote” ]
|
DESCRIPTION
|
SQUARE
FOOT
|
MAX
SIZE
|
|
PAPER
(Indoor Photobase)
Standard
paper suitable for photography or graphics as an indoor
application. Foam core mountable.
|
$6.00
|
60"
|
|
PHOTO
CANVAS (Semi Gloss)
For
that artistic look when reproducing art or photography.
Can be gallery wrapped or used with standard stretcher bar
setup for framing.
|
$20.00
|
48"
|
|
PHOTO
CANVAS (Matt Finish)
For
that artistic look when reproducing art or photography.
Can be gallery wrapped or used with standard stretcher bar
setup for framing.
|
$18.00
|
48"
|
|
BANNER
Heavy
duty banner material for indoor or outdoor use. The
durability necessary for long-term and repeated use.
|
$13.00
|
60"
|
|
BANNER
Standard
banner material for indoor or limited, short term outdoor
use. Not recommended for adverse weather conditions or
long term outdoor use.
|
$9.00
|
60"
|
|
PREMIUM
VINYL
Premium
vinyl for indoor or outdoor use including curved surfaces.
Also perfect for vehicle graphics.
|
$14.00
|
48"
|
|
VINYL
Economy
vinyl for indoor or outdoor application on flat surfaces only.
|
$9.00
|
48"
|
|
BACKLIT
FILM
Used
to create lighted signs or displays. Can also be used on
windows for illumination.
|
$12.00
|
48"
|
|
SUNBRELLA
AWNING
Fabric
used as awning material or other canvas type projects where
vinyl lettering or graphics are to be applied.
|
$10.00
|
60"
|
|
VINYL
(FOR SUNBRELLA)
Vinyl
for graphics or text to be applied to Sunbrella fabric.
Long lasting for indoor and outdoor use.
|
$12.00
|
60"
|
Decal Preparation:
Add
40% of the square foot cost for eradicated or cutout graphics,
includes application of application tape backing.
Fabric
Tailoring & Preparation:
We
can also prepare (seaming, cutting, grommets, etc.) your banner or
awning in standard or custom configurations.
The cost to prepare a standard banner (Insert Size) typically
runs approximately (Insert Price.)
Preparing a standard 6 foot peaked awning runs approximately
$150 and preparing an 8 foot oversized dome awning runs
approximately $350.
|
